Introduction; Product Description; Intended Use Of Product; Expected Service Life - Stryker Power-Pro Xt Manuel D'utilisation Et D'entretien

Introduction

This manual is designed to assist you with the operation and maintenance of the Stryker Power-PRO™ XT cot. Read
this manual thoroughly before using the equipment or beginning maintenance on it. To ensure safe operation of this
English
equipment, it is recommended that methods and procedures be established for educating and training staff on the safe
operation of this cot.

PRODUCT DESCRIPTION

The Stryker Model 6506 Power-PRO™ XT is a powered ambulance cot that consists of a platform mounted on a
wheeled X-frame designed to support and transport a maximum weight of 700 lb (318 kg) in pre-hospital and hospital
environments. The device is collapsible for use in emergency vehicles and has an adjustable load height feature to
allow the device to be set to different ambulance deck heights for proper body mechanics during loading and unloading.
The NiCd battery-powered hydraulic lift system allows operators to raise and lower the cot using the powered controls,
while duplicate foot-end controls on the upper and lower lift bars accommodate different operator positions or sizes.
The cot is equipped with a manual back-up release handle to allow the operation of cot functions in the event of
power loss. The device is equipped with the following: a retractable head section for 360-degree mobility in any height
position, side rails, patient securement straps, an adjustable pneumatic backrest and various optional accessories that
assist with transport of the patient. Maximum patient comfort is attainable with the three different litter positions of
shock, flat leg and optional knee gatch positioning.

INTENDED USE OF PRODUCT

The Stryker Power-PRO™ is a powered wheeled stretcher, which is intended to support and transport the entire body
of a traumatized, ambulatory or non-ambulatory human patient (includes infants and adults). The battery-powered
hydraulic lift system is intended to help reduce the effort required by the operator to raise and lower the cot. The device
is designed to support patients in a supine (horizontal) or sitting position and facilitate the transportation of associated
medical equipment (i.e. oxygen bottles, monitors, and/or pumps) in emergency/transport vehicles. This ambulance cot
is intended to be used in pre-hospital and hospital environments, in emergency and non-emergency applications. It is
rated to a maximum capacity of 700 lb (318 kg) (sum of the patient, mattress and accessory weight) and the intended
operators of the device are trained professionals including emergency medical service and medical care center
personnel, as well as medical first responders.

EXPECTED SERVICE LIFE

• 7 years for Power-PRO™ XT cot
• 7 years for SMRT™ charger
• 2 years for SMRT™ Pak battery

CONTRAINDICATIONS

• Power-PRO™ XT is not intended for extended stay or to be used as a hospital bed.
• Power-PRO™ XT is not intended to be used in devices which modify air pressure, such as hyperbaric chambers.
Return To Table of Contents
www.stryker.com 6506-109-005 REV F 1-9