Attaching The Mattress - Stryker Power-Pro Xt Manuel D'utilisation Et D'entretien

ATTACHING THE MATTRESS

Use the standard gatch bolster mattress (6500-002-150/6506-002-150) with the standard siderail. Use the wider gatch
bolster mattress (6500-003-130) with the optional eXpandable patient system (XPS).
To attach the mattress to the cot:
1. Align the Velcro ® on the back of the mattress with the Velcro
2. Attach the strap at the foot end of the mattress through the two holes in the foot end skin on the cot litter.
3. Pull the strap through the buckle and attach the Velcro
Note: The optional gatch bolster mattress for XPS (6500-003-130) is not compatible with the standard siderail
(6506-031-000).
Note: The mattress is a Type B applied part.
CAUTION
Do not store items under the cot mattress. Storing items under the mattress can interfere with the operation of the cot.
www.stryker.com
Operation Guide
® on the cot litter.
® to secure the strap.
6506-109-005 REV F
Return To Table of Contents
1-77
English