Checking The Hour Meter/Lcd Error Display - Stryker Power-Pro Xt Manuel D'utilisation Et D'entretien

CHECKING THE HOUR METER/LCD ERROR DISPLAY

English
The hour meter (C), located on the foot end control enclosure, indicates the amount of time (HHH.H hours) that the
hydraulics have been activated as shown in Figure 21. You can use the hour meter to determine the frequency for
preventive maintenance procedures as listed on
The error display (C), located on the foot end control enclosure, provides error code information for troubleshooting.
See "LCD Error Codes" on
Return To Table of Contents
1-32
Power-PRO™ Cot User Controls
page 1-80.
page 1-93.
6506-109-005 REV F
B
C
Figure 21
www.stryker.com