Installing The Base Storage Net - Stryker Power-Pro Xt Manuel D'utilisation Et D'entretien

INSTALLING THE BASE STORAGE NET

English
To install the base storage net, wrap the Velcro
CAUTION
• The weight of the equipment in the base storage net (if equipped) must not exceed 20 lb (9 kg).
• Be careful when retracting the base to avoid damaging items stored in the base storage net.
Note: The optional kickstand (6085-102-000) is not compatible with the optional base storage net (6500-160-000).
Return To Table of Contents
1-74
Operation Guide
straps around the base tubes.
®
6506-109-005 REV F www.stryker.com