Attaching The Pedi-Mate; Infant Restraint System - Stryker Power-Pro Xt Manuel D'utilisation Et D'entretien

ATTACHING THE PEDI-MATE

English
See the Pedi-Mate
Pedi-Mate ®

Infant Restraint System.

Note: The Pedi-Mate
To secure the Pedi-Mate
1. Remove any restraints that are already attached to the cot.
2. Raise the cot backrest to the full upright position.
3. Position the Pedi-Mate
4. Wrap the straps around the backrest and insert the ends of the straps through the brackets. Securely fasten the
buckle (see Figure 75).
WARNING
To avoid accidental release of the Pedi-Mate
from obstructions on the cot or accessories.
Return To Table of Contents
1-64
Operation Guide
® INFANT RESTRAINT SYSTEM
users manual for the manufacturer's recommendations for the use, operation and care of the
®
Infant Restraint System is a Type B applied part.
®
to the cot:
®
® pad flat on the backrest with the black backrest straps out (see Figure 74).
® , and possible injury to the infant, ensure that the buckle is located away
Figure 74
Figure 75
6506-109-005 REV F www.stryker.com