Guidance And Manufacturer's Declaration - Electromagnetic Immunity - Stryker Power-Pro Xt Manuel D'utilisation Et D'entretien

POWER-PRO XT (CONTINUED)

Guidance and manufacturer's declaration - electromagnetic immunity

The Model 6506 Power-PRO™ XT cot is intended for use in the electromagnetic environment specified below. The
customer or user of the Model 6506 Power-PRO™ XT cot should assure that it is used in such an environment.
IMMUNITY test
Conducted RF
EN/IEC 61000-4-6 150 kHz to 80 MHz
www.stryker.com
EMC Information
EN/IEC 60601
Compliance level
test level
3 Vrms 3 Vrms
6506-109-005 REV F
Electromagnetic environment - guidance
Portable and mobile RF communications
equipment should be used no closer to any
part of the model 6506 Power-PRO™ XT
cot, including cables, than the recommended
separation distance calculated from the
equation appropriate for the frequency of the
transmitter.
Recommended separation distance
d=1.2√P
Applies to:
• SMRT™ Charger (6500-201-010)
Return To Table of Contents
English
1-121