Mackie RCF RX 3000 Instructions D'emploi page 85

Press ENTER to configure the system devices. A message appears on the control unit display requesting that you enter the password, whe-
re used (see the section PASSWORD FOR MENU ACCESS). Use the numerical keypad to enter the password (where used) and press
ENTER. The following submenus are shown on the display:
• INPUT PROCESSORS
• OUTPUT PROCESSORS
• GROUPS
• RELAY CONFIGURATION
• CONSOLES
• ACU (AMPLIFIERS)
• GPI EVENTS DEFINITION
• TIMER EVENTS DEFINITION
• VOX
• RECORDER
• SYSTEM
• COMPILE & SAVE
• EXIT WITHOUT SAVING
The first screen only shows the first three items of the configuration menu. To display the subsequent items, use the ↑ / ↓ and/or pag ↑ / pag
↓ keys..
INSERT PASSWORD TO ACCESS CONFIGURATION
PASSWORD:
- - - = = = MAIN MENU = = = - - -
->INPUT PROCESSORS
->OUTPUT PROCESSORS
->GROUPS
- - - = = = MAIN MENU = = = - - -
->RELAY CONFIGURATION
->CONSOLES
->ACU (AMPLIFIERS)
- - - = = = MAIN MENU = = = - - -
->GPI EVENTS DEFINITION
->TIMER EVENTS DEFINITION
->VOX
- - - = = = MAIN MENU = = = - - -
->RECORDER
->SYSTEM
->COMPILE & SAVE
- - - = = = MAIN MENU = = = - - -
->SYSTEM
->COMPILE & SAVE
->EXIT WITHOUT SAVING
Menu for programming the inputs of the IB 3210 / IB 3280 AUDIO INPUT boards.
Menu for programming the outputs of the OB 3230 AUDIO OUTPUT boards.
Menu for programming the groups of audio zones of the system.
Menu for programming the relays of the IO 3250 digital INPUT/OUTPUT boards.
Menu for programming the BM 3616 digital consoles.
Menu for programming the A.C.U.s dedicated to controlling the power amplifiers of the system (see the
section AMPLIFIER CONTROL UNITS).
Menu for programming the events controlled by the GPI inputs of the IO 3250 digital INPUT/OUTPUT
boards.
Menu for programming the timed events; i.e. the events that must take place at a pre-set time.
Menu for programming the VOX devices of the OB 3230 AUDIO OUTPUT boards.
Menu for recording and playing back audio files.
Menu for setting various parameters of the system.
Command for exiting from the system configuration menu and saving the settings made.
Command for exiting from the system configuration menu without saving the settings made.
"nr password"
ENTER
Pag ↓
Pag ↓
Pag ↓
Pag ↓
85