VEVOR YML03110F Mode D'emploi page 8

Safety Instructions of the Submersible Pump
(Ignore this if you ordered SKU without Submersible Pump)
The manipulation and utilization of our pump are very simple and convenient. The user just
need stop our a suitable height level of water and link the pump with the outlet water pipe
and then connect the pump with power supply in accordance with the mark on the
label(different country different standard). Thus, the pump can run well.
To reduce risk of electric shock
• Always unplug the pump from the electric outlet before cleaning and handling.
• Use with clean water only. Do not place it in any liquid. Never let the pump run dry.
• OPTION-The pump is supplied with ground in conductor and a grounding type
attachment plug, and must be connected only to a proper ground outlet to reduce the risk
of electric shock (Europe standard only).
• Do not use the pump in water above 90℉ or 30℃.
• Prevent the water from running into the electrical outlet down the cord.
• Do not lift, carry, or pull the pump by the power cord.
• Do not replace the pump cord. Stop using the pump if it sustains damage (Option for
pump with safe low voltage).
• Always use the transformer provided to run the water pump or consult with your
electrician before other transformer is connected.
• Do not connect the transformer provided to other appliance.
• Always unplug the power transformer from the electrical outlet before any cleaning and
handling.
• Indoor use only. Place the transformer away from fire, moisture & direct sunlight. (Option
for pump with light).
• Do not immerse hot glass tube cover into water or pour water directly on glass tube
surface when it is lighted.
• Glass tube cover is make of glass. It is fragile. Should handle with care during light
installation & light bulb maintenance. Wear gloves to protect your hands from hurting if the
glass is broken.
• The supply cord cannot be replaced. If the cord is damaged, the appliance should be
scrapped.
To keep water clean