Operation Of The Keys; Setting Region, Language, Date, Time, Altitude (Above Sea Level) And Printer Type - NDD EasyOne-CS Manuel De L'utilisateur

2030434-002 Rev. B

4.2 Operation of the keys

(ON/OFF) This switches EasyOne-CS on or off. Press and hold the key (for at least 2 sec.) until you
hear an audible signal.
(ENTER) This confirms data entry or the selection and moves you to the next entry field.
(<) Deletes last character,
scrolls to the left or up.
(>) Scrolls to the right or down
(0,ESC) Press the key briefly in order to enter (0),
keep the key pressed longer (at least 1 sec.) in order to return to the previous field with
(ESC) or abort the operation,
press the key briefly twice in order to enter a blank (the key function operates only if let-
ters can be entered).
(2,abc), etc. Press the key briefly in order to enter the digit "2",
press the key briefly in order to enter "A" (the key function operates only if letters can be
entered),
press the key briefly twice in order to enter "B" (the key function operates only if letters
can be entered),
if you press the same key quickly several times consecutively, you will scroll first to the
upper-case letters, then to the number and then to the lower-case letters,
umlauts and special characters can be found on key (1).
Please note: The escape key (Esc-0) is particularly helpful and important in unit navigation.
The escape function requires the key to be pressed and held momentarily. Es-
cape is useful for moving to previous menus, items, or fields, and escaping a
spirometry test. Pressing this key rapidly in fields where letters are possible,
such as patient name and report header, allows the entry of a blank space or a
zero.

4.3 Setting region, language, date, time, altitude (above sea level) and printer type

Press the (ON/OFF) key for at least 2 seconds in order to switch on the instrument. The instrument
switches off automatically if no key is pressed for 15 minutes.
You will see a world map on the display when you switch the instrument on for the first time:
Choose your region (North America, South America, Europe, Asia, Africa or Australia) using the arrow
keys < > and confirm your entry with ENTER. You are then prompted to choose your language and to set
the date, time, contrast, altitude above sea level and the approximate relative humidity at the instru-
ment's location. This data is not preset.
Note that the region can be selected only once. You must use the "Device Configuration / Reset Device"
menu to choose a new region.
The spirometer is delivered with the pre-set default settings. Please refer to Chapter 8 of this User Man-
ual for the procedure for changing the settings. Adapting the settings to your needs allows you to get
the most out of your EasyOne-CS instrument.
Page 6