Wilo Stratos GIGA2.0-I Notice De Montage Et De Mise En Service page 196

en
196
Setting the control functions
Heating/cooling switchover
...►
Set control mode
Setting assistant
Current: hydraulic shunt – return...
Heating/cooling switchover
Current: Cooling
Setpoint temperature (ΔT-c)
Current: 21.0 K
Temperature sensor T1
Sensor input: analogue input 3
Fig. 47: Heating/cooling switchover
First select "Heating" in the "Heating/cooling switchover" menu.
Then configure additional settings (e.g. setpoint etc.) in the "Set control mode" menu.
Heating/cooling switchover
Heating
Cooling
Automatic
Binary input
Fig. 48: Heating/cooling switchover_Heating
The settings for cooling are made once the specifications for heating are completed. To
do this, select "Cooling" in the "Heating/cooling switchover" menu.
Heating/cooling switchover
Heating
Cooling
Automatic
Binary input
Fig. 49: Heating/cooling switchover_Cooling
More settings (e.g. setpoint, Q-Limit
menu.
Setting the
automatic or
manual switchover
between heating and
cooling.
The pump manually
switches to heating
application.
The pump manually
switches to cooling
application.
, etc.) can be made via the "Set control mode"
Max
WILO SE 2021-12