18.5
Configuration warnings
Installation and operating instructions Wilo-Stratos GIGA2.0-I, Wilo-Stratos GIGA2.0-D
Faults, causes and remedies
Code
Warning
Additional information
about causes and rem-
edy:
Twin-head pump func-
tion is only possible with
two compatible pumps
of the same type.
586
Overvoltage
Additional information
about causes and rem-
edy:
The pump is running. If
the voltage continues to
increase, the pump is
shut down.
Excessive voltages can
damage the pump.
587
Battery weak.
Additional information
about causes and rem-
edies:
If the battery power is
high enough, the time
information, e.g. in heat
measurement and stat-
istics, is displayed cor-
rectly.
If the battery power is
too low, it may not be
possible to maintain
time recording.
This does not impair the
pump function
1)
590
MFA
partner type is not
appropriate.
Additional information
about causes and rem-
edy:
A maximum replace-
ment flow is provided
for the Multi-Flow Ad-
aptation partner.
Check the partners
highlighted with (!) in
1)
the MFA
overview of
the context menu.
1)
MFA = Multi-Flow Adaptation
2)
BMS = Building Management System
Configuration warnings occur if an incomplete or contradictory configuration has been
made.
Example:
The "Hall temperature control" function requires a temperature sensor. The corre-
sponding source is not specified or not correctly configured.
Cause
Remedy
Power supply is too
Check power supply
high.
Battery power too
Replace battery.
low
1)
A MFA
partner does
Check type and software
not have the appro-
of the partner pump.
priate type.
en
255