Restore Factory Settings - Wilo Stratos GIGA2.0-I Notice De Montage Et De Mise En Service

16.2 Factory setting
Installation and operating instructions Wilo-Stratos GIGA2.0-I, Wilo-Stratos GIGA2.0-D
Restore and reset
Up to three different pump settings can be saved as restore points. If required, these
saved settings can be retrieved/restored via the "Restore settings" menu.
The pump can be reset to factory settings.
In the "Restore and reset" menu, select
1. "Factory setting"
2. "Restore factory setting"
3. and "Confirm factory setting" one after the other.
NOTICE
Resetting pump settings to factory settings replaces the current pump settings!

Restore factory settings

Factory setting
Reset settings
Factory setting
Cancel
Fig. 95: Factory setting
Settings
Set control mode
Setting assistant
Pump On/Off
Twin-head pump operation
Connecting twin-head pump Single pump: not connected
Twin-head pump alteration
External interfaces
SSM relay
Function SSM relay
Trigger delay
Reset delay
SBM relay
Function SBM relay
Trigger delay
Reset delay
D1
D2
Stratos GIGA2.0
Radiator – Dynamic Adapt
plus
Motor on
Twin-head pump: connected
24 h
Faults and warnings
5 s
5 s
Motor in operation
5 s
5 s
not configured
not configured
en
Factory settings are
restored
CAUTION!
All settings will be
lost!
Stratos GIGA2.0 ... R1
Basic control mode – n-
const.
Motor on
Single pump: not con-
nected
Twin-head pump: con-
nected
24 h
Faults and warnings
5 s
5 s
Motor in operation
5 s
5 s
not configured
not configured
243