Bluetooth On/Off; Key Lock On - Wilo Stratos GIGA2.0-I Notice De Montage Et De Mise En Service

en
14.3

Bluetooth On/Off

14.4

Key lock on

236
Device settings
Units
SI units 1
SI units 2
SI units 3
US units
Table 51: Units
NOTICE
Units are set to SI units 1 as a factory setting.
Under "Settings"
1. "Device settings"
2. "Bluetooth On/Off"
you can switch Bluetooth on or off. When Bluetooth is switched on, the pump can
connect to other Bluetooth devices (e.g. Smartphone with Wilo app).
NOTICE
When the Wilo-Smart Connect Module BT is plugged in, Bluetooth is switched on.
The key lock function prevents accidental change of pump parameters by unauthorised
persons.
Under "Settings"
1. "Device settings"
2. "Key lock ON"
you can activate the key lock.
Simultaneous pressing (> 5 seconds) of back
the key lock.
NOTICE
You can also lock the keys using the digital inputs DI 1 and DI 2 (see section "Applic-
ation and function of the digital control inputs DI1 and DI2" [} 216]).
If the key lock was activated through digital inputs DI1 or DI2, the deactivation can
be done only through the digital inputs! A button combination is not possible!
The home screen and warning as well as error messages are also displayed when the key
lock is active so you can monitor the pump status.
A lock symbol on the home screen indicates an activated key lock.
Description
Representation of physical values in SI
units
Exception
3
• Volume flow in m /h
• Delivery head in m
Representation of delivery head in kPa
Representation of delivery head in kPa
and volume flow in l/s
Representation of physical values in US
units
and context button deactivates
WILO SE 2021-12