Installation and operating instructions Wilo-Stratos GIGA2.0-I, Wilo-Stratos GIGA2.0-D
Faults, causes and remedies
Code
Fault
615
Sensor source not suit-
ably configured.
The sensor source is not correctly configured. In the context menu there is a
link for configuring the sensor source.
618
Sensor source not avail-
able.
The sensor source or the CIF module is not correctly configured. In the con-
text menu there are links for configuration.
619
Sensor source not suit-
ably configured.
The sensor source is not correctly configured. In the context menu there is a
link for configuring the sensor source.
621
Sensor source not avail-
able.
The sensor source or the CIF module is not correctly configured. In the con-
text menu there are links for configuration.
641
Setpoint source not
suitably configured.
The setpoint source for the cooling function is not correctly configured. In
the context menu there is a link for configuring the setpoint source.
642
Setpoint source not
available.
The setpoint source for the cooling function or the CIF module is not cor-
rectly configured. In the context menu there are links for configuration.
643
Sensor source not suit-
ably configured.
The sensor source for the cooling function is not correctly configured. In the
context menu there is a link for configuring the sensor source.
644
Same sensor source not
possible.
The sensor sources for the cooling function are not correctly configured. In
the context menu there is a link for configuring the sensor sources.
646
Sensor source not avail-
able.
The sensor source or the CIF module is not correctly configured. In the con-
text menu there are links for configuration.
Cause
Remedy
Return temperature
Configure source to "tem-
sensor is not connec-
perature sensor" usage
ted to correct source.
type or select another
Input is not correctly
source.
configured.
Return temperature is
Insert CIF module.
not connected to ex-
Activate CIF module.
isting CIF module.
Temperature sensor
Configure source to "tem-
for "Heating/cooling
perature sensor" usage
switchover" is not
type or select another
connected to the
source.
correct source. Input
is not correctly con-
figured.
Temperature value
Insert CIF module.
for "Heating/cooling
Activate CIF module.
switchover" is not
connected to existing
CIF module.
Setpoint is not con-
Configure source or
nected to correct
select another source.
source. Input is not
correctly configured.
Setpoint not connec-
Insert CIF module.
ted to existing CIF
Activate CIF module.
module.
Sensor 1 is not con-
Configure source.
nected to correct
Select other source.
source. Input is not
correctly configured.
Sensor sources are
Configure a sensor source
configured to the
to another source.
same source.
Sensor value is not
Insert CIF module.
connected to existing
Activate CIF module.
CIF module.
en
257