en
256
Faults, causes and remedies
Code
Fault
601
Setpoint source not
suitably configured.
The setpoint source is not correctly configured. In the context menu there is
a link for configuring the setpoint source.
602
Setpoint source not
available.
The setpoint source or the CIF module is not correctly configured. In the con-
text menu there are links for configuration.
603
Sensor source not suit-
ably configured.
The sensor source is not correctly configured. In the context menu there is a
link for configuring the sensor source.
604
Same sensor source not
possible.
The sensor sources are not correctly configured. In the context menu there is
a link for configuring the sensor sources.
606
Sensor source not avail-
able.
The sensor source or the CIF module is not correctly configured. In the con-
text menu there are links for configuration.
607
Sensor source not suit-
ably configured.
The sensor source is not correctly configured. In the context menu there is a
link for configuring the sensor source.
609
Sensor source not avail-
able.
The sensor source or the CIF module is not correctly configured. In the con-
text menu there are links for configuration.
610
Sensor source not suit-
ably configured.
The sensor source is not correctly configured. In the context menu there is a
link for configuring the sensor source.
611
Same sensor source not
possible.
The sensor sources are not correctly configured. In the context menu there is
a link for configuring the sensor sources.
614
Sensor source not avail-
able.
The sensor source or the CIF module is not correctly configured. In the con-
text menu there are links for configuration.
Cause
Remedy
Setpoint is not con-
Configure source or
nected to correct
select another source.
source. Input is not
correctly configured.
Setpoint not connec-
Insert CIF module.
ted to existing CIF
Activate CIF module.
module.
Sensor 1 is not con-
Configure source.
nected to correct
Select other source.
source. Input is not
correctly configured.
Sensor sources are
Configure a sensor source
configured to the
to another source.
same source.
Sensor value 1 is not
Insert CIF module.
connected to existing
Activate CIF module.
CIF module.
Sensor 2 is not con-
Configure source or
nected to correct
select another source.
source. Input is not
correctly configured.
Sensor value 2 is not
Insert CIF module.
connected to existing
Activate CIF module.
CIF module.
Feed temperature
Configure source to "tem-
sensor is not connec-
perature sensor" usage
ted to correct source.
type or select another
Input is not correctly
source.
configured.
Sensor sources for
Configure one of the
heat meter con-
sensor sources for the heat
figured for the same
meter to another source.
source.
Feed temperature is
Insert CIF module.
not connected to ex-
Activate CIF module.
isting CIF module.
WILO SE 2021-12