Siemens SINAMICS S Manuel page 1091

n_limit pos
n_limit pos
0.000...210 000.000 RPM p1083[D]
p1083[D] (210 000.000)
n_limit neg
n_limit neg
-210 000.000...0.000 RPM p1086[D]
p1086[D] (-210 000.000)
<100> Only for non-activated function module "expanded setpoint channel" (r0108.8 = 0). For r0108.8 = 1, [3050] applies and not [3095].
1 2
DO: SERVO
Setpoint channel not activated - generating the speed limits (r0108.8 = 0)
Maximum speed
0.000...210 000.000 RPM
p1082[D] (1500.000)
3 4
Min
0
Reference value for the ramp-function generator
-1
0
Max
5 6
fp_3095_01_eng.vsd
24.02.05 V02.04.00
p0115[3] (4000.00 µs)
<100>
n_limit pos effective
r1084
[5030.5]
[5210.1]
[8010.2]
[6030.2]
[3020.6]
Speed limits if a setpoint channel
[3060.4]
has not been activated
[3070.4]
(r0108.8 = 0).
[5300.1]
n_limit neg effective
r1087
[5030.5]
[5210.1]
[8010.2]
[6030.2]
7 8
Function diagram
- 3095 -
SINAMICS S