Setting The Occlusion Warning Signal; Utility Menu; Brightness - Arthrex Synergy Insufflation FM134 Instructions D'utilisation

Configuration Menu (Overview)
EN

Utility menu

40
You can now do the following:
1. save the selected value by pressing the (SAVE) function field. The display de-
picts (SAVED) for 2 seconds. After saving you return automatically to the pre-
vious level.
2. press the  function field to return to the previous menu level without sav-
ing,
3. or press (EXIT) to return to the work screen without saving.
8.2.3

Setting the Occlusion Warning Signal

Operating mode Default setting
Bariatric Signal ON
High Flow Signal ON
In Configuration Menu I, press  to access Configuration Menu II.
The display changes to the Configuration menu II.
In Configuration Menu II, press the Warning signal: Occlusion function field to
access the selection menu.
The display switches to the selection menu for the Warning signal: Occlusion.
For example, tap the Signal OFF function field.
You can now do the following:
1. save the selected value by pressing the (SAVE) function field. The display de-
picts (SAVED) for 2 seconds. After saving you return automatically to the pre-
vious level.
2. press the  function field to return to the previous menu level without sav-
ing,
3. or press (EXIT) to return to the work screen without saving.
8.3 Utility Menu
While insufflation is stopped, press the Actual function field for 2 seconds to ac-
cess the Configuration menu. In the Configuration menu I, press the  function
field to access the Configuration menu II and there press the  function field
again to access the Utility menu.
8.3.1

Brightness

Factory setting = 75%
In the Utility menu, press the Brightness setting function field to access the se-
lection menu.
The display switches to the Brightness selection menu.
Press the appropriate function field to adjust the brightness (25%, 50%, 75%, or
100%).
You can now do the following:
1. save the selected value by pressing the (SAVE) function field. The display de-
picts (SAVED) for 2 seconds. After saving you return automatically to the pre-
vious level.
2. press the  function field to return to the previous menu level without sav-
ing,
3. or press (EXIT) to return to the work screen without saving.