Setting The Gas Flow Rate; Setting The Maximum Nominal Pressure - Arthrex Synergy Insufflation FM134 Instructions D'utilisation

8.2 Configuration Menu II
While insufflation is stopped, press the Actual function field for 2 seconds to ac-
cess the Configuration menu. In the Configuration menu I, press the  to access
the Configuration menu II.
8.2.1

Setting the Gas Flow Rate

Rate Operating Default setting
mode
Flow rate 1 Bariatric 5 l/min
High Flow 3 l/min
Flow rate 2 Bariatric 25 l/min
High Flow 20 l/min
Flow rate 3 Bariatric Max. value*
High Flow 40 l/min
**see equipment data label on the back of the device
In Configuration Menu II, press the Gas flow rates function field to access the se-
lection menu.
The display switches to the gas supply selection menu.
Press the function field (flow rate 1: 3 l/min), for example, to set gas flow rate 1.
The display switches to the setting menu for gas flow rate 1.
Press the º or » function field to set the value.
You can now do the following:
1. save the selected value by pressing the (SAVE) function field. The display de-
picts (SAVED) for 2 seconds. After saving you return automatically to the pre-
vious level.
2. press the  function field to return to the previous menu level without sav-
ing,
3. or press (EXIT) to return to the work screen without saving.
8.2.2

Setting the Maximum Nominal Pressure

Operating mode Default setting
Bariatric 30 mmHg
High Flow 30 mmHg
In Configuration Menu I, press  to access Configuration Menu II.
The display changes to the Configuration menu II.
In Configuration Menu II, press the Maximum nominal pressure function field.
The display switches to the Maximum nominal pressure selection menu.
Press the º or » function field to set the value.
Configuration menu II
Range
1-20 l/min
1-20 l/min
Flow rate 1-max. value*
Flow rate 1-40 l/min
Flow rate 2-max. value*
Flow rate 2-40 l/min
Range
5-30 mmHg
5-30 mmHg
Configuration Menu (Overview)
39
EN