Setting The Gas Supply Type; Setting The Alarm Volume; Configuration Menu Ii - Arthrex Synergy Insufflation FM134 Instructions D'utilisation

Configuration Menu (Overview)
EN
38
ing,
3. or press (EXIT) to return to the work screen without saving.
8.1.3

Setting the Gas Supply Type

Use this menu to select the type of connected gas supply.
Select House gas if you are working with a house gas supply (use the correspond-
ing house gas device adapter available as an additional accessory). The gas supply
indicators and displays are described in chapter 9 Safety Functions, page 42. If
house gas supply has been selected but bottled gas (pressure >15 bar) is connect-
ed to the device, the gas supply display automatically switches accordingly.
Select Bottle if you want to work with a gas bottle. The gas supply indicators and
displays are described in chapter 9 Safety Functions, page 42. It is not possible to
operate the device if "Bottle" gas is set and a house gas supply is actually connect-
ed.
Factory setting = House gas
In Configuration Menu I, press the Gas Supply function field to access the gas
supply selection menu.
The display switches to the gas supply selection menu.
You can now do the following:
1. save the selected value by pressing the (SAVE) function field. The display de-
picts (SAVED) for 2 seconds. After saving you return automatically to the pre-
vious level.
2. press the  function field to return to the previous menu level without sav-
ing,
3. or press (EXIT) to return to the work screen without saving.
8.1.4

Setting the Alarm Volume

Factory setting = Level 3
In Configuration Menu I, press the Alarm volume function field to access the vol-
ume selection.
The display switches to the Alarm volume selection menu. The selection/setting
applies to all operating modes.
For example, tap the Level 2 function field to lower the volume.
You can now do the following:
1. save the selected value by pressing the (SAVE) function field. The display de-
picts (SAVED) for 2 seconds. After saving you return automatically to the pre-
vious level.
2. press the  function field to return to the previous menu level without sav-
ing,
3. or press (EXIT) to return to the work screen without saving.