Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Instruction Manual
for WPT, KTS, KPS, KTM, WSM series use and maintenance
1.0 - ROTARY BLADES VACUUM PUMP VERSIONS
The Rotary blades vacuum pump can be supplied in the following versions:
SERIES
WPT 480/600/720
KPS 490/550/670
KTS-C 840/960/1080
KTM 1200/1500
KTM 1800/2300
WSM 2700/3300
- Non disponibile
O Disponibile
LEFT
ROTATION
RIGHT
ROTATION
LEFT
ROTATION
RIGHT
ROTATION
pag. 38
GENERAL INFORMATION
M
MA
P
O
O
O
O
O
O
O
O
O
-
-
O
-
-
O
-
-
O
.../M VERSION .../MA VERSION (WITH GEARBOX)
.../P VERSION (FOR PULLEY APPLICATION)
LEFT
ROTATION
ON REQUEST
.../D VERSION (DIRECT DRIVE)
RIGHT
ROTATION
ON REQUEST
.../H VERSION (FOR HYDRAULIC DRIVE)
LEFT
ROTATION
ON
REQUEST
(WITHOUT
MOTOR)
D
H
G
O
O
O
O
O
O
O
O
O
O
O
-
O
O
-
-
-
-
• ... / M the power take-off is actuated trough the cardanic shaft at 540 rpm.
This version can be recognised by the gearbox placed at the front of the Rotary
blades vacuum pump, by the identification plate.
• ... / MA the power take-off is actuated with a cardan shaft at 1000 r.p.m.
This version can be recognised by the gearbox placed at the front of the Rotary
blades vacuum pump, by the identification plate and by the stamping placed on
the gearbox cover.
• ... / P the power take-off is actuated trough pulley and belts. This version can
be recognised by the cylindrical shaft with key of the power take off and by the
plate, .../P = pulley application.
• ... / D the power take-off is actuated through a cardan shaft directly
connected to the splined hub. This version can be recognised by the splined
hub placed at the front of the Rotary blades vacuum pump and by the
identification plate, ... / D = direct drive. Resting horizontally on its four feet..
• ... / H
the power take-off is actuated through a gears hydraulic
motor. This version can be recognised by the hydraulic motor sup-
port placed at the front and by the identification plate,
.
hydraulic drive
GA
K
KA
O
-
-
O
O
O
O
-
-
-
-
-
-
-
-
-
-
-
, ... / H =
Publicité
Chapitres
Table des Matières
