Instructions; Diagram Of The Cooling Circuit With Radiator And Electric Fan - battioni Pagani WPT Série Notice D'emploi Et D'entretien

Instruction Manual
for WPT, KTS, KPS, KTM, WSM series use and maintenance

3.4.5 - INSTRUCTIONS

- Always put antifreeze liquid in the cooling circuit, at the rate recommended by the suppliers.
- Fill the cooling circuit completely, putting in water through the feed tank.
- Make sure that there is no air in the circuit, as this would hinder the water circulation prevent cooling.
- In the event of failure or malfunctioning of the cooling circuit, the working time must be reduced.

3.4.6 - DIAGRAM OF THE COOLING CIRCUIT WITH RADIATOR AND ELECTRIC FAN

WPT, KTS, KPS VERSIONS
Left rotation direction of the pump
1 Tank
2 Radiator
KTM, WSM VERSIONS
Left rotation direction of the pump
Attention!
The KPS series features two plugs (right image).
If possible, protect the area and do not transit or stop in the moving or hot pump
area.
pag. 44
3 12 - 24 V Electric fan
4 Cooling pump
Right rotation direction of the pump
5 Delivery 7 12 - 24 V Battery
6 Return 8 Thermostat
Right rotation direction of the pump
9 Fuse 8 A
10 Hand wheel cock