Never Utilize The Following Types Of Oil; Gearbox Oil; Oil Level - battioni Pagani WPT Série Notice D'emploi Et D'entretien

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Instruction Manual
for WPT, KTS, KPS, KTM, WSM series use and maintenance

5.2.1 - NEVER UTILIZE THE FOLLOWING TYPES OF OIL:

TRANSMISSION OIL - USED OIL - HYDRAULIC OIL - VEGETABLE OIL
GEAR OIL - BREAKS OIL.

5.2.2 - GEARBOX OIL

All pumps version M-MA-K-KA (with gearbox) are provided with gear lubricating oil inside the gearbox.
If the oil inside the gearbox needs changing, use ISO VG 460 oil.

5.3 - OIL LEVEL

The Rotary blades vacuum pump is supplied WITHOUT lubrication oil inside the tank. Put into the tank lubrication oil type ISO
VG 100 and into the gearbox oil type ISO VG 460. For food use it is possible to use vaseline oil with same characteristics of
recommended mineral oils.
Figure 4
KTM / WSM
KTM / WSM SERIES: The minimum and maximum levels are indicated by the vertical level indicator placed on either side of
the tank. The oil temperature and Rotary blades vacuum pump overheating can be controlled by a thermometer inside the level
indicators (see Figure 4).
WPT, KTS, KPS SERIES: The minimum and maximum oil levels are indicated by indicator placed on the tank (see Figure 5 and
Figure 6) or by the level rod (see Figure 7).
WPT
KTS
6,5
6,5
pag. 54
Figure 5
OIL TANK CAPACITY [l]
KTM
KPS
1200-1500
6,5
10
.../M .../MA .../K .../KA VERSIONS: the gearbox is supplied with
an oil loading plug and an oil level plug at the top of the gearbox (see
figure 8), placed on the front of the gearbox to allow the level to be
checked.
To ensure correct lubrication, the oil should always be visible in the
oil level.
Figure 8
KTS / KPS / WPT
KTM
WSM 2700
1800-2300
14
8,3
WSM 3300
8,3

Publicité

Table des Matières
loading

Table des Matières