Obligatory Safety Signs To Be Displayed In The Work Place And Around The Rotary Blades Vacuum Pump; Conditions And Limits Of Use - List Of Dangers - battioni Pagani WPT Série Notice D'emploi Et D'entretien

OBLIGATORY SAFETY SIGNS TO BE DISPLAYED
IN THE WORK PLACE AND AROUND THE ROTARY BLADES
CAUTION:
MOVING
PARTS
DO NOT ENTER THE
CARDANIC TRANSMISSION
WORKING AREA WHEN IN
MOTION, AVOID WEARING
CLOTHING WITH LOOSE
ENDS OR PARTS THAT
MAY BE HOOKED
CONDITIONS AND LIMITS OF USE – LIST OF DANGERS
In the Common Market countries, the installation must comply with directive 2006/42/EC and subsequent modifications, while in
the other countries it must comply with the country's safety regulations.
This Rotary blades vacuum pump has been designed to create a vacuum or pressure inside a tank connected to it.
Under no circumstances must liquids, dust or any kind of solid matter enter the Rotary blades
vacuum pump because they could cause it to break. Therefore it is necessary to equip the system
with safety valves.
The use of the Rotary blades vacuum pump for any purpose other than that specified above is
absolutely forbidden, not provided for by the manufacturer and therefore highly dangerous.
Do not use the Rotary blades vacuum pump to handle flammable and/or explosive liquids or for
materials that give off flammable gasses.
Do not use the Rotary blades vacuum pump in potentially explosive atmospheres.
Never remove the guards fitted on the Rotary blades vacuum pump and always check their
efficiency every time the machine is used.
Any work on the machine must be carried out while it is not running.
Failure to comply with the instructions given in this manual may lead to the following dangers:
• Danger of being crushed by the Rotary blades vacuum pump mass during handling and transport;
• Danger of getting entangled in the shaft transmission parts if the necessary guards are removed;
• Heat dangers due to the temperatures that can be reached by the Rotary blades vacuum pump;
• Acoustic danger due to the noise generated and to failure to use personal means of protection;
• Danger to operator's hands during testing with suction and delivery tubes detached from the pump;
• Danger of abrasion from the shaft of the hydraulic pump support if the Rotary blades vacuum pump
is operated with the hydraulic pump removed;
• Danger of projection of liquid and solid materials due to a heavy breakage of the Rotary blades vacuum pump;
for WPT, KTS, KPS, KTM, WSM series use and maintenance
VACUUM PUMP
CAUTION:
HOT WALLS
READ THIS MANUAL
BEFORE
STARTING TO USE THE
ROTARY BLADES
VACUUM PUMP
INDICATION OF HANDLE ROTATION DIRECTION
TO SELECT SUCTION OR COMPRESSION
PHASES
DANGER
CAUTION: KEEP
HANDS CLEAR
MAINTENANCE
PERSONAL
TO BE DONE
PROTECTIVE EQUIPMENT THE
USE OF WHICH IS MANDATORY
Instruction Manual
pag. 35