Uninstallation - battioni Pagani WPT Série Notice D'emploi Et D'entretien

Rotary blades Hydraulic
vacuum pump
WPT 480/H KM 40.87-SO
WPT 600/H KM 40.87-SO
WPT 720/H KM 40.87-SO
KM 40.109-SO-
KTS 840/H
KM 40.109-SO-
KTS 960/H
KM 40.109-SO-
KTS 1080/H
KPS 490/H KM 40.87-SO
KPS 550/H KM 40.87-SO
KPS 670/H KM 40.87-SO
KTM 1200/H MF M5 100
KTM 1500/H MF M5 100
KTM 1800/H MF M5 100
KTM 2300/H MF M5 100
Table 1

3.7 - UNINSTALLATION

The Rotary blades vacuum pump should be uninstalled using the following procedure:
.../M - MA
1) stop the power tractor take-off;
2) remove the cardanic shaft from the
Rotary blades vacuum pump power take-
off;
3) remove the tube connecting the Rotary
blades vacuum pump to the tank-cart,
loosening the metal clamp and slipping
the tube from the sleeve;
4) remove any hydraulic connection;
5) remove the fastening screws and uninstall
the rotary blades vacuum pump.
.../H
1) stop the hydraulic system;
2) remove the hydraulic connections to the
motor;
3) remove the tube connecting the Rotary
blades vacuum pump to the tank-cart,
loosening the metal clamp and slipping
the tube from the sleeve;
4) remove any hydraulic connection;
5) remove the fastening screws and uninstall
the rotary blades vacuum pump.
for WPT, KTS, KPS, KTM, WSM series use and maintenance
HYDRAULIC MOTORS
Maximum
operating
motor
pressure
1,5 bar 107 l/min
1,5 bar 107 l/min
1,5 bar 107 l/min
1,5 bar 134,7 l/min
SAE
1,5 bar 134,7 l/min
SAE
1,5 bar 134,7 l/min
SAE
1.5 bar 125 l/min
1.5 bar 125 l/min
1.5 bar 125 l/min
1,5 bar 123,7 l/min
1,4 bar 123,7 l/min
1,3 bar 123,7 l/min
1 bar 123,7 l/min
1) stop the tractor power take-off;
2) remove the transmission belts;
3) remove the tube connecting the Rotary
blades vacuum pump to the tank-cart,
loosening the metal clamp and slipping
the tube from the sleeve;
4) remove any hydraulic connection;
5) remove the fastening screws and uninstall
the rotary blades vacuum pump.
1) stop the power take-off of the tractor
2) disconnect the cardan shaft from the PTO
of the Garda or Ledra unit.
3) remove the connection pipe, which
connects the rotary vacuum vane pump
to the liquid trailer, loosening the metal
clamp and removing the pipe from the
sleeve;
4) remove any hydraulic connections;
remove connection pipes between centrifuge
or high pressure pump and system
5) remove the fixing screws and uninstall the
rotary vacuum vane pump
Capacity
No.
Pressure
rpms
1200 210 bar
1200 237 bar
1200 264 bar
1200 189 bar
1200 221 bar
1200 250 bar
1400 198 bar
1400 232 bar
1400 261 bar
1200 334 bar
1200 400 bar
1200 400 bar
1200 400 bar
.../P
.../G - GA
Instruction Manual
Maximum Trans.
pressure Power
hydraulic
system
280 bar 31 kW
280 bar 35 kW
280 bar 39 kW
250 bar 35 kW
250 bar 41 kW
250 bar 47 kW
280 bar 34 kW
280 bar 40 kW
280 bar 45 kW
400 bar 57 kW
400 bar 68 kW
400 bar 68 kW
400 bar 68 kW
.../D
1) stop the tractor power take-off;
2) remove the cardanic shaft from the
Rotary blades vacuum pump power take-
off;
3) remove the tube connecting the Rotary
blades vacuum pump to the tank-cart,
loosening the metal clamp and slipping
the tube from the sleeve;
4) remove any hydraulic connection;
5) remove the fastening screws and uninstall
the rotary blades vacuum pump.
.../K - KA
1) stop the power take-off of the tractor
2) remove the cardan shaft from PTO of the
rotary vacuum vane pump;
3) remove the connection pipe, which
connects the rotary vacuum vane pump
to the liquid trailer, loosening the metal
clamp and removing the pipe from the
sleeve;
4) remove any hydraulic connections;
5) remove the fixing screws and uninstall the
rotary vacuum vane pump
Torque
255 Nm
287 Nm
320 Nm
288 Nm
337 Nm
381 Nm
232 Nm
278 Nm
307 Nm
468 Nm
560 Nm
560 Nm
560 Nm
pag. 47