Emergency Engine Starting - Yamaha VX700F Manuel D'atelier

3
4
R
L
Br
2 1
IGNITION SYSTEM
LOAD CONTROL RELAY
1. Inspect:
Inspection steps:
•
•
SCH8340
Positive battery terminal → Brown 1
Negative battery terminal → Brown/White 2
Positive tester probe → Red 3
Negative tester probe → Blue 4
Br/W
•
SCH8350

EMERGENCY ENGINE STARTING

(VX700/SX700/MM700)
If a short circuit occurred in the lighting system, the
signal system, or the meter system, the engine can
be started in an emergency by cutting off the load
control relay.
1. Disconnect:
2. Start the engine.
SCH8360
8-9
•
Load control relay (black) 1
Disconnect the load control relay from the cou-
pler.
Connect the pocket tester (Ω × 1) and battery
(12 V) to the load control relay terminals as
shown.
If load control relay does not have continuity
between the red and blue terminals, replace it.
•
Load control relay (black) 1
– +
ELEC