Yamaha VX700F Manuel D'atelier page 252

DRIVE CHAIN HOUSING
4. Install:
•
Shift rod 1
5. Adjust:
•
Shift rod length a
Adjustment steps:
•
Move the shift lever to the "FWD." position.
•
Loosen the locknuts 2.
•
Turn the shift rod 1 so that shift rod free play is
SCH4520
0 mm (in direction where a can be shortened
appropriately) and then turn back the shift rod
1/4 turns.
•
Tighten the locknuts.
6. Fill:
•
Drive chain housing oil
Refer to "DRIVE CHAIN" in CHAPTER 2.
7. Adjust:
•
Drive chain slack
Refer to "DRIVE CHAIN" in CHAPTER 2.
4-25
POWR
TR