Yamaha VX700F Manuel D'atelier page 316

ENGINE ASSEMBLY
Order Job name/Part name
Engine removal
Exhaust assembly
Carburetors
Recoil starter
AC magneto rotor
Primary sheave
Coolant
1 Coolant hose 1
2 Coolant hose 2
3 Carburetor heating hose 1
4 Plastic band
5 Carburetor heating hose 3
6 Battery negative lead
7 Water temperature sensor coupler
8 Ignition coil coupler
9 Rear bracket (right)
10 Oil pump cable
11 Oil delivery hose
12 Vacuum hose
13 Starter motor
14 Starter motor lead
15 Engine assembly
ENGINE ASSEMBLY
Å
:
ı
:
Ç
:
Î
:
‰
:
Q'ty
Remove the parts in the order listed below.
Refer to "EXHAUST ASSEMBLY".
Refer to "CARBURETORS" in CHAPTER 7.
Refer to "RECOIL STARTER".
Refer to "AC MAGNETO".
Refer to "PRIMARY SHEAVE AND DRIVE V-
BELT" in CHAPTER 4.
Drain. Refer to "COOLING SYSTEM" in CHAP-
TER 2.
1 Disconnect.
1 Disconnect.
1 Disconnect.
1
1 Disconnect.
1 (VX700DX/VT700)
1 Disconnect.
1 Disconnect.
1
1
2 Disconnect.
1 Disconnect.
1 (VX700DX/VT700)
1 (VX700DX/VT700)
1
For installation, reverse the removal procedure.
5-3
ENG
15 Nm (1.5 m · kg, 11 ft · lb)
23 Nm (2.3 m · kg, 17 ft · lb)
33 Nm (3.3 m · kg, 24 ft · lb)
57 Nm (5.7 m · kg, 41 ft · lb)
90 Nm (9.0 m · kg, 65 ft · lb)
SCH5040
Remarks