Special Tools; For Tune Up - Yamaha VX700F Manuel D'atelier

SPECIAL TOOLS

Some special tools are necessary for a completely accurate tune-up and
assembly. Using the correct special tool will help prevent damage that can
be caused by the use of improper tools or improvised techniques.
NOTE:
Be sure to use the correct part number when ordering the tool, since the part
number may differ according to country.

FOR TUNE UP

•
Sheave gauge
P/N: YS-42421-1 (15 mm offset) 1
YS-42421-2 (20 mm offset) 2
This gauge is used to measure the sheave distance and for offset adjust-
SCH1130
ment.
•
Dial gauge
P/N: YU-03097 (for U.S.A./Canada)
90890-03097 (for Europe)
This gauge is used for run out measurement.
SCH1140
•
Fuel level gauge
P/N: YM-01312-A (for U.S.A./Canada)
90890-01312 (for Europe)
This gauge is used to measure the fuel level in the float chamber.
SCH1150
•
Distance gauge
P/N: YS-91047-3 (for U.S.A./Canada)
90890-01702 (for Europe)
This gauge is used to measure the distance between the center of the
primary sheave and the center of the secondary sheave.
SCH1160
SPECIAL TOOLS
1-4
GEN
INFO