Oil Pump - Yamaha VX700F Manuel D'atelier

1
1
SCH2050
1
SCH2060

OIL PUMP

Air bleeding
CAUTION:
The oil pump and oil delivery line must be bled in
the following cases:
•
Any portion of the oil system has been
disconnected.
•
The machine has been turned on its side.
•
The oil tank has been run empty.
•
As part of the pre-delivery service.
1. Fill:
•
Oil tank 1
Recommended oil:
Oil tank capacity:
SCH2040
2. Remove:
•
Carburetors
Refer to "CARBURETORS" in CHAPTER 7.
3. Remove:
•
Rear bracket (right) 1
4. Place a rag under the oil pump assembly to soak
up any spilled oil.
5. Disconnect:
•
Oil hose
6. Drain the oil until no more air bubbles appear in
the oil hose.
7. Connect:
•
Oil hose
8. Disconnect:
•
Oil delivery hose
9. Feed the "YAMALUBE 2-cycle oil" into the oil
delivery hose using an oil can for complete air
bleeding.
10. Connect:
•
Oil delivery hose
11. Remove:
•
Bleed bolt 1
•
Gasket (bleed bolt)
12. Drain the oil until no more air bubbles appear from
the bleed hole.
13. Inspect:
•
Gasket (bleed bolt)
Damage/wear → Replace.
2-4
INSP
OIL PUMP
ADJ
YAMALUBE 2-cycle oil
3.0 L (2.6 Imp qt, 3.2 US qt)