Yamaha VX700F Manuel D'atelier page 52

COOLING SYSTEM
18. Inspect:
•
Gasket (coolant drain bolt)
Damage → Replace.
19. Install:
•
Gasket
•
Coolant drain bolt 1
Coolant drain bolt 1:
SCH2130
20. Install:
•
Exhaust joint
•
Exhaust pipe
Refer to "EXHAUST ASSEMBLY" in CHAP-
TER 5.
Bolt (exhaust joint) 1:
SCH2210
21. Fill:
•
Cooling system
Recommended coolant:
Coolant mixing ratio (coolant:water)
Total amount:
CAUTION:
•
Hard water or salt water is harmful to engine
parts. If soft water is not available, use boiled or
distilled water.
•
Do not use water containing impurities or oil.
2-9
INSP
ADJ
13 Nm (1.3 m · kg, 9.4 ft · lb)
1st:
18 Nm (1.8 m · kg, 13 ft · lb)
2nd:
27 Nm (2.7 m · kg, 19 ft · lb)
High quality ethylene glycol
antifreeze containing
corrosion inhibitors
3:2 (60%:40%)
VX700/VX700DX/SX700:
3.8 L (3.34 lmp qt, 4.02 US qt)
MM700:
3.9 L (3.43 lmp qt, 4.12 US qt)
VT700:
4.0 L (3.52 lmp qt, 4.23 US qt)
Reservoir tank capacity:
0.28 L (0.25 lmp qt, 0.30 US qt)
From LOW to FULL level:
0.13 L (0.11 lmp qt, 0.14 US qt)