Table des Matières
Publicité
POWR
RECOIL STARTER
5011
5012
5013
5014
2. Install:
• Drive plate spring 1
• Washer 2
• Circlip 3
3. Set:
• Spiral spring
NOTE:
Wind the spiral spring three turns counter-
clockwise with the starter rope.
4. Install:
• Bushing 1
• Drive pawl 2
• Return spring 3
• Drive plate 4
• Thrust washer 5
• Bolt 6
INSPECTING THE RECOIL STARTER
Inspect:
• Recoil starter operation
Rough operation → Repair.
NOTE:
When checking the recoil starter operation,
push the start-in-gear protection stopper
and pull the recoil starter handle (at the
same time).
5-9
E
5
Publicité
Table des Matières
