Table des Matières
Publicité
INSP
ADJ
OIL INJECTION SYSTEM
3180
3185
Measuring steps
(1) Fill the fuel tank with the fuel/oil mix-
ture (50:1) and fill the oil tank with
engine oil.
Recommended fuel
Fuel type
Unleaded regular gasoline
Fuel rating
PON: 86
RON: 91
Recommended engine oil
Engine oil type
2-stroke outboard engine oil
Engine oil grade
TC-W3
CAUTION:
Only use the fuel/oil mixture (50:1) or
engine malfunctions or seizure may result.
(2) Disconnect the oil pump link rod joint
from the oil pump lever.
(3) Move the oil pump lever 1 to the fully-
opened position.
(4) Remove the oil inlet hose 2 from the
intake manifold.
(5) Install the oil inlet hose onto the grad-
uated cylinder.
NOTE:
The measuring range on the graduated cyl-
inder should be divided into 0.1-cc incre-
ments.
(6) Start the engine.
(7) Set the engine idling speed at 1,500
r/min.
Refer to "ADJUSTING THE ENGINE
IDLING SPEED" on page 3-8.
(8) Measure the engine oil discharge for 3
minutes.
3-17
E
Publicité
Table des Matières
