Homelite CSP-3314 Manuel D'utilisation page 30

Homelite all in one.qxp
GB
F D E I
Weight - No bar, chain, fuel or oil
Fuel tank capacity
Oil tank capacity
Bar lengths
Chain pitch
Chain gauge
Chain type
Drive sprocket
Engine displacement
Engine power (ISO 7293)
Maximum engine power (ISO 7293)
Maximum engine speed with attachment
Idling engine speed
Sound pressure level (ISO 7182)
Sound power level (ISO 9207)
Vibration (ISO 7505):
- Front Handle
- Rear Handle
FEATURES
(A) Front hand guard/
Chain Brake
(B) Front handle
(C) Cylinder cover
(D) Primer bulb
(E) Choke Lever
(F) Chain
(G) Starter Grip
(H) Guide Bar
(I) Chain Catcher
(J) Trigger Release
OPERATION
Read the operation manual and follow all
warnings and safety instructions.
Wear eye protection and ear protection.
Keep all bystanders, especially children and pets,
at least 15m from the operating area.
For your safety, study this entire manual before operating
the saw. Pay particular attention to the precautions and
instructions listed in the operator's manual.
23/12/05 16:14
P NL S DK N FIN GR HU
English
SPECIFICATIONS
33 cc
4.4 kg
575 cm 3
3
350 cm
33-50 cm
9.5 mm
1.27 mm
Semi-Chisel, LoPro
6-tooth
33 cm 3
1.3 kW
1.5 kW
12,500 min -1
2,800 - 3,400 min
102 dBA
112 dBA
2
4 m/s
5 m/s 2
(K) Throttle Lock Button
(L) Chain Oil Cap
(M) Silencer
(N) Carburettor
Adjustment
(O) Rear handle
(P) Throttle Trigger
(Q) Fuel Mix Cap
(R) On/Off Switch
(S) Starter/Fan Housing
Page 22
CZ RU RO PL SLO HR TR EST LT
40 cc
4.4 kg
575 cm 3
3
350 cm
33-50 cm
8.26 mm
1.27 mm
Semi-Chisel, LoPro
7-tooth
40 cm 3
1.5 kW
1.9 kW
12,500 min -1
-1 -1
2,800 - 3,400 min
103.9 dBA
110 dBA
2
3.5 m/s
7.7 m/s 2
WARNING
The warnings and instructions in this section of
the operator's manual are for your safety and to
prevent serious personal injury.
UNDERSTANDING YOUR CHAINSAW SAFETY
DEVICES
LOW KICK-BACK SAW CHAIN
A low-kick-back saw chain is a chain which has met the
kickback performance requirements.
The rakers (depth gauges) ahead of each cutter can
minimise the force of a kick-back reaction by preventing the
cutters from digging in too deeply at the kick-back zone.
Only use replacement chain that is equivalent to the original
chain or has been certified as a low kick-back chain.
As saw chains are sharpened, they lose some of the low
kickback qualities and extra caution is required.
GUIDE BARS
Generally, guide bars with small radius tips have
somewhat lower kick-back potentials.
CHAIN BRAKE (Fig. 3)
Chain brakes are designed to quickly stop the chain from
rotating. When the chain brake lever/hand guard is pushed
towards the bar, the chain should stop immediately.
A chain brake does not prevent kick-back. The chain brake
should be cleaned and tested daily. Refer to "Operation"
later in this manual for additional information.
22
LV SK BG
45 cc
4.4 kg
575 cm 3
3
350 cm
33-50 cm
8.26 mm
1.27 mm
Semi-Chisel, LoPro
7-tooth
45 cm 3
1.6 kW
2.7 kW
12,500 min -1
-1
2,800 - 3,400 min
103.9 dBA
111 dBA
2
3.5 m/s
7.7 m/s 2