Packaging Handling; Unpackaging; Lifting - Eurosystems P130 Mode D'emploi

4. INDICATION FOR THE HANDLING OF
THE PACKAGING AND THE MACHINE
DANGER!
Always wear safety shoes and gloves
for all handling operations.

4.1. PACKAGING HANDLING

To remove the packaging, use a forklift
truck with forks as shown in
weight of the packaging with the machine
inside is specified in the paragraph called
"Machine Specifications".

4.2. UNPACKAGING

The machine is supplied packaged unless
agreed otherwise.
How to remove it from the packaging:
• Remove the wooden struts in the
four corners of the packaging.
• Cut or tear the cardboard at the
base of the pallet and remove it com-
pletely by raising it;
• Cut any ties on the bottom;
After reading and thoroughly understanding the
P130 machine's User Manual, start up the ma-
chine following the instructions in the "Instructions
for use" chapter and take it down from the pallet.
EN-16

4.3. LIFTING

Only use systems, devices and instru-
ments that are suitable for lifting mass-
es that are equal or above what is in-
dicated in the "Machine Specifications"
chapter.
Do not walk or remain under loads be-
[ fig. 03 ] . The ing moved.
Do not use lifting systems or devices
with sharp parts.
Before using lifting ropes or bands,
check how strong they are. In case of
damage, even partial they must be re-
placed.
Never lift the machine when it is con-
nected to an accessory or piece of tool.
Only lift the machine using hooks shown
in [ fig. 04 ]
the case where there is no widening for
the hoist as shown in
essary to remove the handlebar support
bonnet [1]
DANGER!
DANGER!
CARE!
DANGER!
CARE!
the rear part of the frame. In
[ fig. 05 ]
[ fig. A ] following the proce-
it is nec-