Automatic Parking Brake Lever; Parts Of The Machine; Wheels - Eurosystems P130 Mode D'emploi

• Make sure that the PTO lever [22] is
in the neutral
• Release the parking brake by moving
the lever [25] into the position of
• Open the fixing hooks moving the le-
ver [26] into the position
• Exert pressure on the handlebars from
below upwards in such a way that the
front of the machine slides off the tool.
INFORMATION:
Every piece of lid has a specific proce-
dure that is shown in its user booklet.
Refer to the specific procedure for a
more detailed explanation.
5.1.7. AUTOMATIC PARKING LEVER
Deactivate the automatic parking brake
moving the lever [25] into the
tion as shown in [ fig. 12 ]
move the machine with the engine off.
INFORMATION:
The automatic parking brake is auto-
matically re-engaged by pressing the
dead man's lever [24].
EN-22
position;
;
posi-
to be able to
5.1.8. HENDLEBAR ADJUSTMENT
LEVER
;
DANGER!
Do not use the adjustment lever when
the machine is moving. Before use,
make sure that the machine is in a sta-
ble position.
• Move the adjustment lever [29] for-
wards as shown in
be able to adjust the height of the han-
dlebars [ fig. 18 ]
positions plus one of parking/storing.
• Move the adjustment lever [29] right-
wards as shown in
to move the handlebars on the side as
shown in [ fig. 20 ]
central, 30° to right and left.
DANGER!
Before resuming the ensuring the han-
dlebars are firmly fixed to the steering
block checking that it produces resist-
ance in all directions.

5.2. PARTS OF THE MACHINE

5.2.1. WHEELS

For the maximum possible traction fit
pneumatic wheels with the notching point-
[ fig. 17 ] in order to
- seven adjustment
[ fig. 19 ] to be able
- three positions: