Storage - Eurosystems P130 Mode D'emploi

DANGER!
The maximum widening allowed is
12 mm. Change the engine belt if the
engine support is 10-11 mm from the
frame to avoid it breaking and to avoid
any damage to the mechanical parts.

7. STORAGE

CARE!
Always remove the ignition key and/or
spark plug hood to prevent inadvertent
or unexpected starting. Replace the
key in a safe place where it cannot be
reached by children.
DANGER!
Park the machine with at least one ac-
cessory attached to stop it tipping over.
When this is not possible follow the in-
structions in the "Parking" paragraph in
the chapter "Handling of packaging and
the machine"
DANGER!
Always close the petrol tap to avoid the
fuel escaping.
DANGER!
Do no park the machine in environ-
ments where there are materials that
could cause fires such as for example:
fertilisers, straw, hay, grass, dry wood
etc.
Short term storage (less than a month):
1. Clean the machine properly;
2. Completely empty the tank or park
the machine at the end of the work en-
suring that the quantity of fuel in the
tank is the minimum possible;
3. Parking:
a. Do not park the machine in
damp environments.
b. Park the machine on stable and
flat ground.
c. Park the machine following the
indications in the "Parking the Ma-
chine" chapter.
4. Cover:
a. Cover the machine with a nylon
or fabric dust cover;
b. Cover the sharp parts of the ma-
chine, the tools and the accesso-
ries.
Long term storage (over a month):
1. Clean the machine properly;
2. Protect the PTO by greasing it
3. Empty the tank completely;
4. Battery and electrical system:
a. Disconnect the battery (negative
pole);
[ fig. 41 ] ;
EN-37