Maintenance Program - Eurosystems P130 Mode D'emploi

6.1. MAINTENANCE PROGRAM

When Who
User
User
User
BEFORE
User
EACH
START UP
User
User
User
AT THE END
OF THE
User
WORK
Authorised
Eurosystems
Spa centre
AFTER
THE FIRST
50
HOURS
Authorised
Eurosystems
Spa centre
User
EVERY
50
DUTY
HOURS
User
What
Check the tyre pressure
Check the tightness of the nuts
on the wheels (pneumatic and
not pneumatic)
Check the parking brake works
properly.
Check that the PTO lever is
released automatically when the
dead man's lever is released.
Check that the clutch lever has
been adjusted properly
Check the engine has enough
lubricating oil of the type and
in the quantity indicated by the
constructor
Check lids and casings of the
machine
Clean the machine
Change the hydrostatic oil -
RECOMMENDED
Check the proper position of the
bypass levers when the dead
man's lever is activated
Grease the power take off
Grease the forward gear pin
Reference
User Manuel, Maintenance chapter
para. Wheels and tyres
User Manuel, Maintenance chapter
para. Wheels and tyres
User Manuel, Maintenance chapter
para. Automatic parking brake
User Manuel, Maintenance chapter
para. Automatic PTO lever release
User Manuel, Maintenance chapter
para. Automatic parking brake
Engine user manual
User Manuel, Maintenance chapter Lids
and casings
Chap. "Maintenance" para. "Cleaning
the machine"
Workshop manual
Workshop manual
User Manuel, Maintenance chapter
User Manuel, Maintenance chapter
EN-31