Clothing - Eurosystems P130 Mode D'emploi

("Safety Devices" paragraph) checking that
all the accident prevention and safety sys-
tems are perfectly working. Removing or
tampering with these devices is prohibited.
Replace the damaged or worn parts;
11. All improper usage, repairs made
by non-expert personnel or the use of
non-genuine parts lead to the cancella-
tion of the warranty and the manufacturing
company declining all liability.
2.1. WARKING AREA AND DANGER
ZONE
The user is responsible for the safety of
people, property and animals that are in-
side the machine's danger area.
This zone is defined as the area within a
circumference of a minimum radius of 10m
with the centre being the tool fitted on the
machine [ fig. 02] .
ATTENZIONE!
This minimum radius can be incrased
according to the tipe of tool attached.
Read carefully its specific manual.
When the machine is working being in the
danger area is not allowed for any reason.
Only the operator who has read and thor-
oughly understood the whole manual is
EN-10
authorised to be in this area and occupy
the operating station behind the handle-
bars gripping them firmly.
Check the zone around before starting the
machine. Pay particular attention to chil-
dren and animals.
Before starting to work on a particular
area, clear it of all foreign objects.
While working always pay attention to the
ground and to the area around and if you
should come across undesirable and/or
dangerous objects before moving away
from the operating station to remove them
turn off the machine and put it in a save
position preventing it from starting up
again suddenly and/or tipping over.

2.2. CLOTHING

While working you MUST always wear
safety footwear, gloves and ear protec-
tions with sound attenuation of at least
20dB.
The customer or machine operator is ex-
clusively responsible for sourcing this
personal protection devices.