Accessory Specifications; Instructions For Handling Of The; Packaging Handling; Unpacking The Accessory - Eurosystems P130 Mode D'emploi

[3]
Do not touch the moving parts (belts
and pulleys). Wait for it come to a
complete stop and keep at a safety
distance.
[4]
Attention! Use gloves when lifting
following the instructions in this
manual.

3. ACCESSORY SPECIFICATIONS

1. Package dimensions: 110x98xH66
(cm.)
2. Accessory overall dimensions:
(wheels on ground) 103x93xH57 (cm.)
3. accessory overall (raised wheel)
84x93xH87 cm
4. Characteristics: nr. 32 blades, cutting
width 80 cm
5. Cutting speed: approx. 2900 rpm
6. Adjustments: Cutting height can be
adjusted to three positions: 2 cm, 4,5
cm and 7 cm
7. Adjustments : cutting height can vary
with wheels from 2cm a 10cm
8. Weight:
a. Accessory/tool: 100 Kg
b. Packed accessory/tool: 115 kg
4. INSTRUCTIONS FOR HANDLING
OF THE PACKAGING AND THE
ACCESSORY
DANGER!
Always wear safety shoes and gloves
for all handling operations.

4.1. PACKAGING HANDLING

In order to move the packaging use a
forklift unit equipped with forks as shown
in [ fig. 04 ] . The weight of the packaging
is shown in the paragraph "accessory
specification" .

4.2. UNPACKING THE ACCESSORY

The accessory is supplied packaged un-
less agreed otherwise.
How to remove it from the packaging:
• Remove the wooden struts placed in
the four corners of the packaging.
• Cut or tear the cardboard at the
[ fig. 04]
EN-7