Preliminary Checks To Be Made; The Machine; Use - Eurosystems P130 Mode D'emploi

7cm (position. S-C), please unscrew
the 4 screws [2] , raise the flail mower
by turning the adjustment screw
11]. Fix the slides in position [4] for in-
termediate/medium cut or [5] for hei-
ght cut . Please follow the same pro-
cedure (reverse procedure) to lower it.
Raise the wheels to free then from the tall
grass and shrubs .
5.5. PRELIMINARY CHECKS TO BE
MADE EACH TIME BEFORE STARTING

THE MACHINE

When the working day begins, before
starting the machine carry out the follow-
ing checks:
• Make sure all safety devices are wor-
king properly, check the status and the
condition of all protective guards and en-
sure they are in place.
DANGER!
If the check of the safety devices and
guards is negative, interrupt all the op-
erations.

5.6. USE

DANGER!
Always pay particular attention when
the PTO is engaged.
[ 3, fig. DANGER!
Always use the personal protection de-
vices required in the paragraph "Cloth-
ing".
DANGER!
Never leave the work operating position
behind the handlebars when the ma-
chine is working
the machine unguarded with the engine
running.
DANGER!
Do not adjust the handlebar when the
machine is moving.
DANGER!
Be careful of the hot parts of the ma-
chine like for example the muffler and
the muffler protection.
DANGER!
If the machine and/or the accessories
should get clogged up, turn off the en-
gine and remove the ignition key and/or
the spark plug hood before intervening.
DANGER!
If the tool, the accessory or the ma-
chine gets damaged, immediately turn
off the engine.
. Never leave
[ fig. 02 ]
EN-11