Maintenance Plan; Protection Guards - Eurosystems P130 Mode D'emploi

6.1. MAINTENANCE PLAN

When What
Before each
Operator
use
After each
Operator
use
Operator
Every 25-30
hours of
operation
Operator
Service
Every 130-
centre eu-
150 hours of
rosystems
operation
spa
Service
Every 400-
centre eu-
450 hours of
rosystems
operation
spa

6.2. PROTECTION GUARDS

Before the engine is started each time
check that the covers and casings, tools
and accessories are fitted properly and
are in perfect condition.
Who
Check the integrity of the
protective guards
Cleaning
Check the blades wear ;
check if the blades are defor-
med or damaged.
Lubricate the oscillation pin
and the screw bushings for
the cutting height adjustment.
Change the blades
Checking the balancing shaft
blades after replacing
Reference
Service and maintenance ma-
nual for the accessory para-
graph "PROTECTION GUARDS"
(paragr. 6.2)
Service and maintenance
manual for the accessory
paragraph "CLEANING"
In case they are very wear or
damaged, please apply to an
authorized service center to
change them.
Service and maintance manual
for accessory paragraph : "GRE-
ASING" (paragr. 6.4)
Please apply to an authorized
service center for the blades
change.
Please apply to an authorized
serivice center for the change.
EN-13