Maintenance Plan; Protection Covers; Protection Guards - Eurosystems P130 Traduction De La Notice Originale

6.1. MAINTENANCE PLAN

When What
Before each
Operator
use
After each
Operator
use
Every 10-15
hours of Operator
operation
Every 25-30
hours of Operator
operation
Service
Every 25-30
centre eu-
hours of
rosystems
operation
spa

6.2. PROTECTION COVERS

Before the engine is started each time
check that the covers and casings, tools
and accessories are fitted properly and
are in perfect condition.
DANGER!
Replace damaged guards before using
the machine!
EN-14
Who
Check the integrity of the
protective guards
Cleaning
Check the wear of the blades.
Check whether the blades are
deformed or damaged
Lubricate the swing pin
Sharpen the blades
Reference
Accessory operation and main-
tenance manual "PROTECTION
COVERS" paragraph
Accessory operation
and maintenance manual
"CLEANING" paragraph
if they are very worn or da-
maged, contact an authorized
centre to have them replaced
"GREASING" chapter in the
accessory's use and maintenan-
ce manual
if they are very worn or dama-
ged, contact a support centre to
have them replaced