General Information; Manufacturer And Machine Data; Symbols Used In The - Eurosystems P130 Traduction De La Notice Originale

1.7. GENERAL INFORMATION

Only use genuine Eurosystems parts. The
user loses all warranty rights in case of
use of non-genuine parts.
Do not make structural modifications or
adaptations to the machine. Such modifi-
cations will cause the cancellation of the
warranty and the manufacturing company
declining all liabilities.
We reserve the right to make constructional
improvements to the machine without
modifying the current instructions.
1.8. MANUFACTURER AND MACHINE
DATA
Manufacturer:
Eurosystems Spa
Via G.Pastore, 8 zona industriale
42045 Luzzara (RE) - Italy
Tel.:+39 0522 977169
Fax:+39 0522 977819
Mail: info@eurosystems-spa.com
Eurosystems Deutschland
Handelsgesellschaft mbH
Im Fuchshau 14, D-73635 Rudersberg
Tel. : +49 7183 30590-0
Fax. : +49 7183 30590-20
Mail: info@eurosystems.info
EN-4
For enquiries and ordering pieces please
contact the area dealer quoting the pro-
duction number. Such number can be
found on the CE label under the handle-
bars [5, fig. 03 ] .
1. Manufacturer
2. Model
3. Serial number - Progressive
4. Year of construction
5. Weight
6. Working widht
1.9. SYMBOLS USED IN THE MANUAL
DANGER!
This symbol shows all the paragraphs in
the current user manual that might affect
your safety, cause death and/or serious
injuries to the operator. Pass on all the
safety instructions to the other users of
the machine.
CARE!
This symbol points up situations that might
cause slight injuries to the operator and/