Cleaning And Washing; Greasing; Sharpening Of The Mowing Blades; Storage - Eurosystems P130 Traduction De La Notice Originale

6.3. CLEANING AND WASHING

Clean and wash the accessory/tool after
each use.
Cleaning:
It is possible to clean the accessory/tool
using compressed air.
CARE!
Under no circumstances the protection
covers can be removed from the ma-
chine.
Washing:
Carefully wash the contact surfaces
between the guides and blade sections
DANGER!
Do not use pressurised water to wash
the accessory/tool when connected
or in close proximity to the machine.
Pressure can damage the electrical
system. Avoid excessive use of water
or the use of water near sensitive parts
such as the motor, batteries, labels, and
electrical systems.

6.4. GREASING

[ fig. 13]
Every 25-30 hours of work grease the
swing pin with the grease nipple (1) on the
right side of the hexagonal hub.
6.5. REPLACING, ADJUSTING AND
SHARPENING THE MOWING BLADES
Please contact an authorized eurosystems
dealer.

7. STORAGE

CARE!
Park the accessory/tool (with or without
the connected machine) on stable
ground.
Short or long term storage:
1. Clean the accessory properly;
2. Cover the accessory/tool with a
nylon or fabric cover;
EN-15