Accessory Specifications; Instructions For Handling Of The Packa- Ging And Machine; Packaging Handling; Unpacking The Machine - Eurosystems P130 Traduction De La Notice Originale

[3]
Do not touch the moving parts (belts
and pulleys). Wait for it come to a
complete stop and keep at a safety
distance.
[4]
Attention! Use gloves when lifting
following the instructions in this
manual.

3. ACCESSORY SPECIFICATIONS

1. Package dimensions: 110x98xH66
(cm.)
2. Accessory overall dimensions:
(wheels on ground) 136x96xH54 (cm.)
3. accessory overall (raised wheel)
110x96xH78 cm
4. Characteristics: nr. 8 blades (4+4),
cutting width 92 cm
5. Cutting speed: approx. 3360 rpm
(80m/sec)
6. Adjustments: Cutting height can be
adjusted to three positions: 5 cm, 7 cm
and 9 cm
7. Supplied with mulching cover and 2
ballasts 4kg/each
8. Weight:
a. Accessory/tool: 76 Kg
b. Packed accessory/tool: 81 kg
4. INSTRUCTIONS FOR HANDLING OF
THE PACKAGING AND MACHINE
DANGER!
Always wear safety shoes and gloves
for all handling operations.

4.1. PACKAGING HANDLING

To move the packaging, use a forklift
truck with forks as shown in
weight of the packaging with the machine
included is specified in the paragraph
named "Machine Specifications".

4.2. UNPACKING THE MACHINE

The machine is supplied packaged unless
agreed otherwise.
How to remove it from the packaging:
• Remove the wooden struts placed in
the four corners of the packaging.
• Cut or tear the cardboard at the
[ fig. 04]
[ fig. 04 ] . The
EN-7