Eurosystems P130 Traduction De La Notice Originale page 41

8. FAULTS
Issue
BLADES DON'T
MOVE
THE GRASSLAND
MOWER VIBRATES
GRASS NOT COM-
PLETELY CUT
GRASSLAND
MOWER SWINGING
ACTION BLOCKED
EVIDENT DROP
IN ENGINE REVS
DURING CUTTING
GRASSLAND
MOWER LIFTS
DURING CUTTING
AD - Authorized Eurosystems Dealer;
U - User
EN-16
Possible Causes
Belt broken
Belt has come out
of the pulleys' seat
Belt has come
out of the belt
stretchers seat
Blades deformed or
got stuck into the
support
Blades very worn or
damaged
No grease in the
swing pin
Grass very high
or thick and/or
presence of shrubs
and/or excessive
forward speed
Grass very high
or thick and/or
presence of shrubs
and/or excessive
forward speed
Solution
Replace the belt
Assemble the belt
properly or replace if it
is damaged/worn
Assemble the belt
properly or replace if
damaged/worn
Unblock with lever. If
they are deformed plea-
se change them
Change the blades
Grease the swing pin
Slow down the motion or
stop to allow the en-gine
revs to recover
Slow down the motion
or stop to allow a correct
position of the cut
(grassland mower on the
ground). Assembly 1 or
2 ballasts.
Who Reference
AD
AD
AD
AD
AD
Please look
U at the chapter
6.4 [ fig. 13 ]
U
Please look
at chapter
U 5.2 Ballast
assembly
[ fig. 09 ]