Eurosystems P130 Mode D'emploi page 28

TABLE OF CONTENTS
1. General information
1.1. Introduction
1.2. How to read the manual
1.3. Storage of the manual
1.4. Designation of parts
1.5. Description and purpose of
the use
1.6. Improper use of the machine
1.7. General information
1.8. Manufacturer and machine data
1.9. Symbols used in the
manual
1.10. Definitions
2. Safety instructions
2.1. Work area and hazard zone
2.2. Clothing
2.3. Explanations of hazard signs and
labels on the accessory/tool
3. Accessory specifications
4. Instructions for handling of the
packaging and accessory
4.1. Packaging handling
4.2. Unpacking the accessory
4.3. Lifting
4.4. Handling
5. Instructions for use
5.1. Front wheel positions
5.2. Coupling the tool/accessory
5.3. Uncoupling the tool/accessory
5.4. Cutting height adjustments
5.5. Preliminary checks to be made
each time before starting
the machine
5.6. Use
EN-02
5.7. Cleaning during the
EN-02
working day
EN-02
6. Maintenance
EN-02
6.1. Maintenance plan
EN-03
6.2. Protection guards
6.3. Cleaning and washing
EN-03
6.4. Greasing
EN-03
6.5. Change, adjustment and balancing
EN-04
of the cutting blades
EN-04
7. Storage
8. Troubles
EN-04
9. Additional instructions
EN-05
9.1. Disposal
EN-05
9.2. Decommissioning and
EN-05
dismantling
EN-06
EN-06
EN-07
EN-07
EN-07
EN-07
EN-08
EN-08
EN-08
EN-08
EN-09
EN-10
EN-10
EN-11
EN-11
EN-12
EN-12
EN-13
EN-13
EN-14
EN-14
EN-14
EN-14
EN-15
EN-17
EN-17
EN-17
EN-1