Plastic; Distribution - Vevor Flm-R30-Ft Mode D'emploi

5.3 Plastic

When selected, a parameter setting box will appear as Figure 5-9 shows. Figure 5-10 shows
examples of the following three items.
: Joint two close intersect areas into one
: Shear a close intersect area contained in another
: pick up the intersect part of two close intersect areas
Figure 5-9 Plastic

5.4 Distribution

Distribution is to several objects distribute in the workplace as considering regular. Eg: there
are 6 rectangles in the workplace, when click distribute, follow dialog window will pop-up:
Figure 5-10 Plastic 1. Original 2. Joint 3. Shear 4. Intersect
76