Installation; Installation Overview; Selecting A Location - Vevor Flm-R30-Ft Mode D'emploi

3.1 Installation Overview

A complete working system consists of the fiber laser source, the laser arm with the
galvanometer lens, a computer (not included) with engraving software (included), all applicable
connection cables, a support column and a worktable. Users can also configure other additional
accessories (such as a rotary axis) to suit their needs.
Use only the hardware, wiring, and power sources that came with or are compatible with this
device.
Installing equipment that your device is not designed to work with can lead to poor
performance, shortened service time, increased maintenance costs, property damage, and personal
injury.
Please note the specific requirements of your system's installation. Every customer must
understand these notes before installation to execute a proper setup and achieve safe laser
performance. If you have any installation questions or problems, contact our technicians and
customer support team.
Any auxiliary equipment must be adjusted to the base machine. Queries may be directed to the
dealer or manufacturer of such equipment.

3.2 Selecting a Location

Prior to assembling your fiber laser marker, select a location meeting all of the following
requirements:

Installation

16