VEVOR FLM-R30-FT Mode D'emploi page 391

Lighten: adjust the current image's brightness and contrast values.
Scan Mode:
Bidirectional Scan: the scan mode is bidirectional when in marking process (Figure 4-57)
Mark Mode:
Drill mode: whether the laser is kept on or restricted in appointed time for each dot's marking
when in proces s
Adjust Power: whether the laser's power is adjusted according to each dot's grey level when
in process
Expand Parameter: Figure 4-58
Y Scan: The scan will run along Y axis line by line.
Figure 4-56 Bitmap Dialog Box
Figure 4-57 Left is unilateral scan; right is bidirectional.
61